Home > Solaris > Membuat Partisi Di Solaris 10

Membuat Partisi Di Solaris 10


Hem,,, mungkin tutorial ini dikit membantu buat temen-temen yang masih awam seperti saya kalo mau ngoperasiin solaris..

kalo mau buat partisi di solaris gimana…? gimana cara ngemountnya?

kalo di linux bisa kita pake cfdisk, trus tinggal pilih-pilih menu dannnnn …. taraaaaaaaaa,,, beres dah,,,

nah kalo di solaris gimanaaa yaaaa,,,,

ternyata berbeda sodara-sodara,,,caranya dikit riweuhhh,,, tapi kalo dah ngerti siiiehh enak kok,,, heheh

begini langkah-langkahnya:

cek doloooo ” iostat -En ”

c1t1d0 Soft Errors: 20 Hard Errors: 0 Transport Errors: 0
Vendor: ATA Product: SEAGATE ST32500N Revision: 3AZQ Serial No:
Size: 250.06GB <250055999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 20 Predictive Failure Analysis: 0
c0t0d0 Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: TEAC Product: DV-28E-V Revision: 1.AC Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
c1t0d0 Soft Errors: 4 Hard Errors: 0 Transport Errors: 0
Vendor: ATA Product: SEAGATE ST32500N Revision: 3AZQ Serial No:
Size: 250.06GB <250055999488 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 4 Predictive Failure Analysis: 0

  1. format
  2. ketikin “p” tanpa tanda kutip
    muncul kan list nya: kalo punya ane kek gini hasilnya:
    PARTITION MENU:
    0 – change `0′ partition
    1 – change `1′ partition
    2 – change `2′ partition
    3 – change `3′ partition
    4 – change `4′ partition
    5 – change `5′ partition
    6 – change `6′ partition
    7 – change `7′ partition
    9 – change `9′ partition
    select – select a predefined table
    modify – modify a predefined partition table
    name – name the current table
    print – display the current table
    label – write partition map and label to the disk
    !<cmd> – execute <cmd>, then return
    quit
  3. Setelah itu ketikin “mod”
    muncul kek gini nih:
    Select partitioning base:
    0. Current partition table (original)
    1. All Free Hog
    Choose base (enter number) [0]?
    —–> trus pilih yang satu
  4. Trus bakalan muncul kek gini:
    Select partitioning base:
    0. Current partition table (original)
    1. All Free Hog
    Choose base (enter number) [0]? 1

    Part Tag Flag Cylinders Size Blocks
    0 root wm 0 0 (0/0/0) 0
    1 swap wu 0 0 (0/0/0) 0
    2 backup wu 0 – 30339 232.42GB (30340/0/0) 487412100
    3 unassigned wm 0 0 (0/0/0) 0
    4 unassigned wm 0 0 (0/0/0) 0
    5 unassigned wm 0 0 (0/0/0) 0
    6 usr wm 0 0 (0/0/0) 0
    7 unassigned wm 0 0 (0/0/0) 0
    8 boot wu 0 – 0 7.84MB (1/0/0) 16065
    9 alternates wm 0 0 (0/0/0) 0

    Do you wish to continue creating a new partition
    —> pilih yes, pokoknya yes aja teruss…

  5. ntar tinggal pilih-pilih aja yaaa,, yang partisi no. 2 jangan di otak atik
  6. Pas ada pertanyaan “Free Hog partition[6]?” teken enter ajah
  7. kalo muncul pertanyaan “enter table name?” jawab “disk” pake tanda kutip
  8. Pas udah mulai labelling partition> label   —> di isiin label,
    trus muncul kek gini nii
    [0] SMI Label
    [1] EFI Label
    Specify Label type[0]:
    –>enter ajahhh..
  9. Trus abis itu ada pertanyaan gini lagii  “Ready to label disk, continue?” pilin yes, trus quit
  10. newfs /dev/dsk/c1t0d0s6
    sebelumnya ini  outputan df-h:
    Filesystem size used avail capacity Mounted on
    /dev/dsk/c1t1d0s0 16G 11G 4.6G 72% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 1.1G 980K 1.1G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    sharefs 0K 0K 0K 0% /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap2.so.1
  11. udah tinggal di mount aja deh
    gini caranya:
    mkdir /home/zone
    mount /dev/dsk/c1t0d0s6 /home/zone

okeh itu doank gan,,, moga bisa dikit-dikit membantu yaaaaa…

Salam blogger….  ^_^

Categories: Solaris Tags: , , ,
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: